Monitoring video signal unstable
There will be problems that monitoring video signal unstable when the elevator is running
A set of solution for integrators
There will be problems that monitoring video signal unstable when the elevator is running
Need professionals technical staff to configuration
Using Qualcomm industrial chips, powerful data processing capabilities and low heat generation ensure long-lasting and stable operation of the equipment.
Qualcomm ARM
Dual core 900MHz
High performance chip
64M memory, efficient and fast data processing
16dBi directional antenna, concentrated signal transmission
Designed with ABS reinforcement for a variety of complex environments
Using professional RF chip, the transmission power can reach up to 800mW
Using SPI technology,
8M large capacity flash
Adopt wireless anti-interference technology to reduce signal receiving sensitivity, improve wireless anti-interference ability, and increase video transmission throughput by more than 15%.
Bridge signal 
Interference signalWith automatic connection technology, no need to enter the management interface, the configuration simple and easy
The multi-level signal strength shows that the bridging status is clear can quickly find the best installation position and direction.
support dc and passive PoE
Through the CPE Controller, you can view the working status of the bridge without leaving the home, and manage the bridge uniformly.
Designed for video surveillance scenarios, the NVR automatically discovers and manages the camera.
With 2 years of maintenance-free installation, the bridge signal is visible and the problem can be quickly located.
The protection level is IP64; the working temperature is -30°C to 55°C, which can adapt to various complicated environments.
With a special pole design, no bracket is required, and the installation is faster and more convenient.
The elevator monitoring wireless transmission scheme consists of a bridge, a switch, a hard disk recorder, and a camera. IP-COM will plan different equipment models for customers to choose according to the site conditions.
The single building networking solution is applicable to single office buildings, residential buildings, apartment buildings
The multi-building networking scheme is applicable to scenes where multiple buildings, residential buildings, apartment buildings, and the like are not suitable for cable transmission.
| Network type | The single building | The multi-building |
|---|---|---|
| Aggregation switch | - | G1024G |
| Access switch | G1008 | G1008 |
| Wireless CPE | CPE3/CPE6 | CPE3/CPE6 |