1 Link/Ack LED indicator for each port
1 PoE Max LED indicator for each device
1 Power LED indicator for each device
Interfaces
8 x 10/100/1000 Base-T Ethernet ports (Data/Power)
2 x 100/1000 Base-X SFP ports
Port Lightning Protection
≥6KV
Forwarding mode
Store-and-forward
Switching capability
20 Gbps
Packet forwarding rate
14.9 Mpps
MAC address table
8K
PoE Power Supply
Ports 1 to 8 support 802.3af/at standard
1 2 4 5 +, 3 6 7 8 -
Input voltage
100-240V～ 50/60Hz
Dimensions(L*W*H)
294 mm * 179.6 mm * 44 mm
Whole Switch Power Consumption
Total power consumption: ＜150W
Maximum PoE power output: 130W
Port features
Three modes controlled by hardware DIP switch:
1. Standard: In this mode, flow control is enabled for all ports to avoid network congestion and ensure stable network operation.
2. Flow Control Off: In this mode, flow control is disabled and no limit is set on data flow of all ports, used for scenarios with massive data flow of uploading and downloading.
3. VLAN: In this mode, ports 1 – 6 are isolated from each other, but all of them can communicate with ports 7, 8, SFP1 and SFP2, reducing broadcast storm.
The data on the above pages are all from IP-COM's internal laboratory, obtained in a specific test environment, and the actual use may be slightly different due to individual differences in products, software versions and environments. Please refer to the actual use.
The product pictures and screen contents on the above pages are for illustration only. The actual product effects (including but not limited to appearance, color, size) and screen display contents (including but not limited to background, UI, and pictures) may be slightly different. Please refer to The real thing shall prevail.
Due to the real-time changes of product batches and production and supply factors, in order to provide accurate product information, specifications, and product characteristics as much as possible, IP-COM may adjust and revise the text descriptions, picture effects, etc. on the above pages in real time, in order to match the actual situation. Product performance, specifications, indexes, parts and other information are matched.
If it is necessary to make the above modifications and adjustments, no special notice will be given.
