Pro-S24-410W  

ProFi Switch

Hardware specifications
Network standards IEEE802.3、IEEE802.3u、IEEE802.3ab、IEEE802.3z、IEEE802.3x、IEEE802.3af/at、IEEE802.1p、IEEE802.1q、IEEE802.1w、IEEE802.1d、IEEE802.1s
LED indicators One Link/Act or PoE LED indicator for each port
One Link/One Link/Act mode converting LED indicator for each device
One PoE mode converting LED indicator for each device
One PoE Max LED indicator for each device
One Power LED indicator for each device
One SYS LED indicator for each device
Fixed ports 24 x 10/100/1000 Base-T Ethernet ports (PoE & Data)
4 x 1000 Base-X SFP port
1 x RJ45 Console port
Lightning protection Port: 6 kV
Power supply: 6 kV
Forwarding mode Store-and-forward
Switching capacity 56 Gbps
Packet forwarding rate 41.7 Mpps
Switching buffer 12 Mbit
MAC address table 16K
Input voltage 100 - 240V AC 50/60Hz
PoE power supply Ports 1 to 24 support IEEE 802.3af/at standard PoE power supply
1 2 4 5 +, and 3 6 7 8 -
Whole switch consumption Whole switch consumption: <410W
Maximum PoE output power: 370W
Dimensions 440 mm * 284 mm * 44 mm(L x W x H)
Environment Operating temperature: 0°C - 45°C
Operating humidity: (10% - 90%)RH, non-condensing
Storage temperature: -40°C - 70°C
Storage humidity: (5% - 90%)RH, non-condensing
Certificates FCC, CE, RoHS
Software features
PoE power supply management Port PoE configuration and power supply with priority
PoE over-temperature protection
PoE scheduled management
Support intelligent and graphical management and PoE-powered device detection (port status, power assignment and PoE-powered device status)
Security features Support ARP receiving limit
Support unknown mac address discard
Support DoS attack defense
Support 802.1x security authentication
Support RADIUS authentication
VLAN IEEE 802.1Q VLAN
VLAN Layer-3 interfaces
Support three port modes: Access, Trunk and Hybrid
DHCP Support DHCP server
Support DHCP relay
Support DHCP snooping
Support Option 82 policy configuration
Routing Support inter-VLAN routing
Support IPv4 static routing
Support dynamic ARP and static ARP
Support ARP aging configuration
Port aggregation Support static aggregation
Support LACP dynamic aggregation
Support a maximum of 32 aggregation groups and a maximum of 8 member ports in each group
STP (Spanning Tree Protocol) Support IEEE 802.1d STP (Spanning Tree Protocol)
Support IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
Support IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
Support edge ports
Support BPDU statistics
Support BPDU Guard, BPDU Filter,
Support Root Guard, Loop Guard, and Loopback-detection
Multicast IGMP Snooping V1/V2/V3
Support port fast leave
Port mirroring N: 1 port mirroring supported
QoS Support SP (Strict Priority)
Support SWRR (Simple Weighted Round Robin)
Support WRR (Weighted Round Robin)
Support 802.1p port trust mode
Support DSCP port trust mode
Support a maximum of 8-queue service quality mapping
Support Tail Drop
Support storm suppression
Support port speed limit
ACL Support MAC ACL
Support IPv4 ACL
Loading and upgrade Support FTP/TFTP/HTTP upgrade
Support con guration import and export
Management and maintenance Support centralized control and management by ProFi software controller
Support CLI configuration
Support Telnet remote configuration
Support SNMP V1/V2/V3
Support web management and maintenance
Support system logs
Support log classification
Support NTP
Support Ping & Tracert tests
Support memory and CPU monitoring
  • The data on the above pages are all from IP-COM's internal laboratory, obtained in a specific test environment, and the actual use may be slightly different due to individual differences in products, software versions and environments. Please refer to the actual use.
  • The product pictures and screen contents on the above pages are for illustration only. The actual product effects (including but not limited to appearance, color, size) and screen display contents (including but not limited to background, UI, and pictures) may be slightly different. Please refer to The real thing shall prevail.
  • Due to the real-time changes of product batches and production and supply factors, in order to provide accurate product information, specifications, and product characteristics as much as possible, IP-COM may adjust and revise the text descriptions, picture effects, etc. on the above pages in real time, in order to match the actual situation. Product performance, specifications, indexes, parts and other information are matched.
  • If it is necessary to make the above modifications and adjustments, no special notice will be given.