F1126P-24-250W  Specification
Hardware specifications
Standards IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at
LED indicators 24 * Link/Act LEDs
1 * G1 LED
1 * G2/SFP2 LED
1 * PoE-MAX LED
1 * Power LED
Interfaces 24 * 10/100 Mbps Base-TX RJ45 ports (Data/Power)
2 * 10/100/1000 Mbps Base-T RJ45 ports (Data)
1 * 1000 Mbps Base-X SFP port (Combo)
Lightning protection Port: 6kV
Power: 6kV
Forwarding mode Store-and-forward
Switching capability 8.8 Gbps
Packet forwarding rate 6.55 Mpps
Buffer 4 Mbit
MAC address table 16K
PoE supply Ports 1-24 support standard IEEE802.3af/at
30W output per PoE port
230W output of the total PoE Power
Power consumption 250W output the whole device
Input voltage AC:100-240V~ 50/60Hz
Dimensions 440 mm x 178.8 mm x 44 mm(L*W*H)
Four Modes "Standard: Default mode of the switch. In this mode, it works as an unmanaged switch; all ports can communicate with each other separately.
Priority: In this mode, port G1 and G2/SFP2 serve as uplink ports, ports 1 – 8 serve as high priority port. All ports can communicate with each other separately.
Extend: In this mode, data rate of ports 17 - 24 reduces to 10 Mbps, the maximum transmission distance can be 250 meters, and all ports can communicate with each other.
VLAN: In this mode, ports 1 - 24 of the switch can communicate with port G1, G2/SFP2 separately, but cannot communicate with each other. You can enable this mode to reduce broadcast storm and isolate DHCP broadcast."
Operating environment Operating temperature: 0°C - 45℃
Storage temperature: -40°C - 70°C
Operating humidity: (10% - 90%)RH, non-condensing
Storage humidity: (5% - 90%)RH, non-condensing
Certificates CCC、FCC、CE、RoHS