CPE6S CPE6S CPE6S CPE6S CPE6S

Microstation Loco M5V2.0

5GHz 12dBi ipMAX ac Outdoor CPEModel: CPE6S
  • 5GHz 11AC 867Mbps
  • 12dbi directional antenna
  • Four fast ethernet Port
  • IP65 waterproof enclosure
  • 6000V Lightning Protection
  • 12V 1A DC/12V 1A Passive PoE supported
CPE6S 5GHz Outdoor CPE is designed to PtP&P2MP solutions for video surveillance transmission and wireless broadband access. Adopts of 11ac wireless technology, the maximum wireless rate can be up to 867Mbps. It features with 12dBi dual polarization directional antenna to provide an efficient way to pick up and maintain a stable long range connection.

5+km transmission Range

CPE6S adopts of internal power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km.

Flexible power supply method enable it easy to deployment

CPE6S support 12V 1A Passive PoE and 12V 1A DC power supply optional. It helps the engineer to deployment the device flexiblely.

ipMAX--IP-COM TDMA proprietary protocol

ipMAX is IP-COM TDMA (Time Division Multiple Access) proprietary protocol to improve performance and capacity for wireless P2MP outdoor application scenarios.

In outdoor environment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can't sense each other, they become "hidden nodes" and cannot coordinate access to the wireless channel. Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput.

With ipMAX, it coordinate all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocol.

iLink--Auto-bridge technology enable it to easy setup

iLink is IP-COM proprietary auto-bridge technology, It enables the CPE or basestation in factory default settings connect to each other automaticaly after the device is powered on. It is very useful for the person who is not familiar with network knowledge, especially for CCTV surveillance transmission application.

Easy to Setup and Manage

CPE6S comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Controller.

Professional Outdoor Design

Equipped with IP65 waterproof enclouse and high quality hardware design, CPE6S can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment

  • 5GHz 11AC 867Mbps
  • 12dbi directional antenna
  • Four fast ethernet Port
  • IP65 waterproof enclosure
  • 6000V Lightning Protection
  • 12V 1A DC/12V 1A Passive PoE supported
Product Information
Model CPE6S
Dimensions 193*109*61mm
Deployment Pole/Wall Mount
Application Scenarios PtP and PtMP wireless connection for Privated ISP access or CCTV Surveillance
Hardware Features
Frequency Range 5GHz
Compliant Standards IEEE 802.11a/n/ac
Private TDMA Protocol ipMAX
Maximum Wireless Rate 867Mbps
Interfaces 4*10/100Mbps Ethernet Port
Antennas Gain 12dBi
Antenna Beamwidth Horizontal: 30° Vertical: 30° Elevation: 30°
Reset Button 1
Power Consumption 4.7W
Waterproof Level IP65
LED indicator Power,PoE/LAN1,LAN2,LAN3,LAN4LED1,LED2,LED3
Power Method 12V1A Passive PoE
12V 1A DC
Lightning Protection 6000V
PoE 802.3af/at /
Passive PoE Passive power over ethernet via PoE/LAN (+4,5pins; -7,8pins ) up to 60 meters
Voltage range: 11-13V DC
Receive sensitivity 11a 6Mbps -92dBm±1.5dBm
11n MCS7 HT20 -72dBm±1.5dBm
11ac MCS9 HT80 -64dBm±1.5dBm
Software Features
Operating mode AP/Station/WISP/P2MP/WDS Repeater/Router
Enable/Disable Wireless Radio Support
SSID Hidden Support
Wireless Client isolation Support
SSID Isolation Support
Channel Bandwidth 20/40/80MHz
Client Limitation For SSID Support
Wireless Access Control Support
Weak Signal Client Limitation Support
Transmission Power Adjustable power by 1dBm
WMM Capable Support
APSD Capable Support
Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
Transparent Bridge Support
VLAN Tagging for SSID Support
DHCP Server Support
VPN Pass-Through PPTP,L2TP
Remote Web access Support
Schedule Reboot Support
Page Timeout Support
Ping Watchdog Support
Dyndns noip, dyndns.org
Network Diagnoses Ping, Traceroute, Signal Scan
Time&Date Setting Support
Firmware upgrade Support
Backup/Restore Configuration Support
Username Managerment Support
System Log Support
Managed By Controller PC Software -- CPE Controller
Others
Package Contents 1*5GHz 12dBi ipMAX ac Outdoor CPE
1*Power adapter
1*PoE Injector
1*Quick Installation Guide
Operating Temperature -30℃ ~ 60℃
Storage Temperature -40℃ ~ 70℃
Operating Humidity 10%~90% non-condensing
Storage Humidity 10%~90% non-condensing
Default login IP 192.168.2.1
Default Login Username admin
Default Login Password admin
Certifications FCC/CE/RoHS
  • Hardware Version: V1.0

    Software Version: V1.0.0.11

    Upgrade Notes:

    1.    This firmware is only fit for CPE6Sv1.0 and its firmware version must be in V1.0.0.XX or more.

    2.    Do not power off the device when upgrading.

    3.    Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.

    4.    Please reset it to factory settings after upgraded it.

    Release Notes:

    1.    First release.

    2.    This version compatible with FCC standard.

    3.    The maximum output power value can be set to 23dBm.

  • Hardware Version: V1.0

    Software Version: V1.0.0.10

    Upgrade Notes:

    1.    This firmware is only fit for CPE6Sv1.0 and its firmware version must be in V1.0.0.XX or more.

    2.    Do not power off the device when upgrading.

    3.    Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.

    4.    Please reset it to factory settings after upgraded it.

    Release Notes:

    1.    This version compatible with CE standard.

    2.    The maximum output power value can be set to 10dBm only.

  • 2022-05-13
    ZIP
  • 2022-08-08
    ZIP
CPE6S 5GHz Outdoor CPE is designed to PtP&P2MP solutions for video surveillance transmission and wireless broadband access.

CCTV Surveillance Transmission

Private ISP Wireless Access