BS6

BS6

5GHz 11n 300Mbps Basestation
  • 5GHz 11n 300Mbps
  • Two RP-SMA Connector
  • IP65 waterproof enclosure
  • 6000V Lightning Protection
  • AP,Station,WISP operating mode supported
  • Up to 60 meters of flexible deployment with included PoE adapter
BS6 5GHz 11n 300Mbps Basestation is designed for PtP and PtMP solutions for rural wireless connectivity and CCTV surveillance.Features with two RP- SMA enable it to pair with dish antenna or sector antenna to establish PtP backhaul connection and P2MP link. It adopts IP-COM TDMA (Time Division Multiple Access) proprietary protocol--IMAX to improve performance and capacity. The auto-bridging technology enable it easy to setup for both business and home users.

Multiple Application Scenarios

PtP Backhaul Connection

Pair with Dish antenna, one work as AP mode and another work as Station mode to create a long distance backhaul connection.

P2MP Link

Pair with Sector antenna, BS6 work as AP mode to deliver wirelss signal to share Internet to local resident,small office.

IMAX-IP-COM TDMA proprietary protocol

IMAX is IP-COM TDMA (Time Division Multiple Access) proprietary protocol to improve performance and capacity for wireless WISP outdoor application scenarios.

In outdoor enviroment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can't sense each other, they become "hidden nodes" and cannot coordinate access to the wireless channel. Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput.

With IMAX, it coordinate all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense MultipleAccess / Collision Avoidance) protocol.

Super channel-Extended Frequency

BS6 adopts of Qualcomm AR9344 chipset and special software mechanism optimization for radio driven architecture to offer extended frequency support. This feature is designed to help users get out of the congested, unlicensed 5GHz band and into clean spectrum.

10/20/30/40MHz Channel Bandwidth for better throughput

BS6 applys special optimization in software for register parameter to deliver 10/20/30/40MHz channel bandwidth option. It provides extra 10MHz and 30MHz channel bandwidth option to consumed according applycation scenarios.

When you choose 30MHz channel bandwidth option, it can increase throughput for noisy environments. When you choose 10MHz channel bandwidth option, it can increase the number of available, non-overlapping channels, so networks can scale better.

Channel shift to avoid interferrence

BS6 provides Channel Shift feature to offset the central frequency 5MHz upper. It can avoid interference from nearby AP and deliver higher throughput.

CPE Controller-Centralized Management Platform

BS6 equips with centralized management software that helps users easily manage all the devices in their network from a single PC - CPE Controller. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using CPE Controller.

Professional Outdoor Design

BS6 adopt of IP65 weatherproof and 6000V Lightning protection design, It can withstand the harsh environmental conditions such as sunshine, rainfall or extremely low/high temperature environment

  • 5GHz 11n 300Mbps
  • Two RP-SMA Connector
  • IP65 waterproof enclosure
  • 6000V Lightning Protection
  • AP,Station,WISP operating mode supported
  • Up to 60 meters of flexible deployment with included PoE adapter
Product Information
Model BS6
Dimensions 194.7*83*42.1mm
Deployment Pole Mount
Application Scenarios PtP, PtMP solution for rural wireless connectivity and CCTV surveillance
Hardware Features
Frequency Range 5GHz
Compliant Standards IEEE 802.11a/n
Private TDMA Protocol IMAX
Maximum Wireless Rate 300Mbps
Interfaces 1*10/100Mbps Ethernet Port
Antennas 2*RP-SMA Connector
Reset Button 1
GND 1
Power Consumption 8.5W
Waterproof Level IP65
LED indicator Power, PoE/LAN,LED1,LED2,LED3
Power Method 24V0.5A Passive PoE
Lightning Protection 6000V
Passive PoE Passive power over ethenet via PoE/LAN (+4,5pins; -7,8pins)
Voltage range: 21-25V DC
Receiver sensitivity MCS0: -96dbm
MCS7: -72dbm
Software Features
Operating mode AP/Station/WISP/P2MP/WDS Repeater/Router
Enable/Disable Wireless Radio Support
SSID Hidden Support
Wireless Client isolation Support
SSID Isolation Support
Channel Bandwidth 10/20/30/40MHz
Client Limitation For SSID Support
Wireless Access Control Support
Weak Signal Client Limitation Support
Transmission Power Adjustable power by 1dBm
WMM Capable Support
APSD Capable Support
Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
Transparent Bridge Support
VLAN Tagging for SSID Support
DHCP Server Support
VPN Pass-Through PPTP,L2TP
Remote Web access Support
Schedule Reboot Support
Page Timeout Support
Ping Watchdog Support
Dyndns noip, dyndns.org
Network Diagnoses Ping, Traceroute, Signal Scan
Time&Date Setting Support
Firmware upgrade Support
Backup/Restore Configuration Support
Username Managerment Support
System Log Support
Managed By Controller PC Software -- CPE Controller
Others
Package Contents 1*5GHz 11n 300Mbps Basestation BS6
1*Passive PoE Power Adapter
1*Quick Installation Guide
Operating Temperature -30℃ ~ 60℃
Storage Temperature -40℃ ~ 70℃
Operating Humidity 10%~90% non-condensing
Storage Humidity 10%~90% non-condensing
Default login IP 192.168.2.1
Default Login Username admin
Default Login Password admin
Certifications FCC/CE/RoHS

PtP Backhaul Connection

Pair with Dish antenna, one work as AP mode and another work as Station mode to create a long distance backhaul connection.

P2MP Link

Pair with Sector antenna, BS6 work as AP mode to deliver wirelss signal to share Internet to local resident,small office.