G3310P-8-150W  

8GE+2SFP Cloud Managed PoE Switch

Hardware specifications
Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1d, IEEE 802.3af, IEEE 802.3at
LED indicators 1 Link/Ack LED indicator for each port
1 PoE Max LED indicator for each device
1 Power LED indicator for each device
1 SYS LED indicator for each device
Interfaces 8 x 10/100/1000 Base-T Ethernet ports (Data/Power)
2 x 100/1000 Base-X SFP ports
Port Lightning Protection ≥6KV
Forwarding mode Store-and-forward
Switching capability 20 Gbps
Packet forwarding rate 14.9 Mpps
MAC address table 8K
PoE Power Supply Ports 1 to 8 support 802.3af/at standard
1 2 4 5 +, 3 6 7 8 -
Input voltage 100-240V~ 50/60Hz
Dimensions(L*W*H) 294 mm * 179.6 mm * 44 mm
Whole Switch Power Consumption Whole switch power consumption: <150W;
Maximum PoE output power: 130W
Operating environment Operating temperature: 0°C - 45℃
Storage temperature: -40°C - 70°C
Operating humidity: (10% - 90%)RH, non-condensing
Storage humidity: (5% - 90%)RH, non-condensing
Software specifications
PoE Power Supply Management Port PoE configuration and power supply priority configuration supported
PoE over-temperature protection supported
Smart graphical management and PoE-powered device detection supported
(port status, power assignment, and PoE-powered device status)
Security Features MAC address binding supported
VLAN IEEE 802.1Q VLAN supported
Port aggregation Static aggregation supported
Dynamic aggregation supported
Spanning tree IEEE 802.1w RSTP (Rapid Spanning Tree Protocol) supported
Port Mirroring N: 1 port mirroring supported
QoS FIFO (First-In, First-Out) supported
SP (Strict Priority) supported
WP (Weighted Priority) supported
Loading & Upgrade HTTP upgrade supported
Configuration import and export supported
Cloud management Supports configuration delivery from IMS cloud platform
Supports log reporting and fault detection
Supports remote maintenance: reboot, backup, upgrade
Local visualization management Supports router, switch, AP, IP camera discovery
Supports automatic generation of topology
Supports online/offline status detection for devices
Supports remotely rebooting the IP camera
  • The data on the above pages are all from IP-COM's internal laboratory, obtained in a specific test environment, and the actual use may be slightly different due to individual differences in products, software versions and environments. Please refer to the actual use.
  • The product pictures and screen contents on the above pages are for illustration only. The actual product effects (including but not limited to appearance, color, size) and screen display contents (including but not limited to background, UI, and pictures) may be slightly different. Please refer to The real thing shall prevail.
  • Due to the real-time changes of product batches and production and supply factors, in order to provide accurate product information, specifications, and product characteristics as much as possible, IP-COM may adjust and revise the text descriptions, picture effects, etc. on the above pages in real time, in order to match the actual situation. Product performance, specifications, indexes, parts and other information are matched.
  • If it is necessary to make the above modifications and adjustments, no special notice will be given.