Pro-6-IWv1.0 Firmware
Model:Pro-6-IW
Last updated:2024/3/22

Hardware Version: V1.0

Software Version: V1.0.0.7

Upgrade Notes:

1.    This firmware is only fit for Pro-6-IWV1.0 and its firmware version must be in V1.0.0.XX or more.

2.    Do not power off the device when upgrading.

3.    Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.

4.    Please reset it to factory settings after upgraded it.

5.    For this version, it can compatible with ProFi Cloud and Software Controller.

6.    For this version, it cannot be compatible with firmware as below, if you do, it will may damage the devices.

Firmware Version

V1.0.0.1(436)

V1.0.0.2(481)

V1.0.0.8(682)

Release Notes:

1.    Fixed the issue that QVLAN function gets wrong when configured QVLAN for both ethernet ports.’

2.    Fixed the issue that configurations get conflict when wired VLAN ID set as the same as wireless VLAN ID.

3.    Fixed the issue that VLAN ID shows 1000 when configured VLAN1 in software controller.

4.    Fixed the issue that IP gets wrong in GUI when it managed by hardware controller.

5.    Fixed the issue that AP cannot be managed by local UI and software controller after configured management VLAN.

6.    Supported roaming between multiple SSIDs.