CPE12 (MS-Loco5AC)    1-pack/2-pack 

CPE12 (MS-Loco5AC)  1-pack/2-pack

5GHz 12dBi ipMAX ac Gigabit Outdoor CPE

CPE12  (MS-Loco5AC) CPE12  (MS-Loco5AC) CPE12  (MS-Loco5AC) CPE12  (MS-Loco5AC)

CPE12 (MS-Loco5AC)  1-pack/2-pack

5GHz 12dBi ipMAX ac Gigabit Outdoor CPE

  • 5GHz 11AC 867Mbps
  • 12dBi directional antenna
  • Two Gigabit Ethernet Port
  • IP65 waterproof enclosure
  • Pre-configured & plug and play(kit)
  • 6000V Lightning Protection
  • 802.3af PoE/12V 1A DC/12V 1A Passive PoE supported

CPE12 (MS-Loco5AC)  1-pack/2-pack  Genel Bakış

CPE12(MS-Loco5AC) 5GHz Gigabit Outdoor CPE is designed to PtP&P2MP solutions for video surveillance transmission and wireless broadband access. Adopts of 11ac wireless technology and gigabit ethernet Port design, the maximum throughput for ptp connection can be up to 450Mbps. PoE 802.3af/at, 12V 1A Passive PoE and 12V 1A DC power supply method supported make it flexible to deploy by engineers. It features with 12dBi dual polarization directional antenna to provide an efficient way to pick up and maintain a stable long range connection.

5+km transmission range

CPE12(MS-Loco5AC) adopts of internal power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km.

Flexible power supply method enable it easy to deployment

CPE12(MS-Loco5AC) support PoE 802.3af/at, 12V 1A Passive PoE and 12V 1A DC power supply optional. It helps the engineer to deployment the device flexiblely.

ipMAX--IP-COM TDMA proprietary protocol

ipMAX is IP-COM TDMA (Time Division Multiple Access) proprietary protocol to improve performance and capacity for wireless P2MP outdoor application scenarios. In outdoor enviroment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can't sense each other, they become“hidden nodes”and cannot coordinate access to the wireless channel. Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput. With ipMAX, it coordinate all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocol.

iLink--Auto-bridge technology enable it to easy setup

For single pack, auto-bridge technology makes the CPE or basestation in factory default settings connect to each other automaticaly after the device is powered on. For the kit pack, the two CPESs inside are pre-configured at the factory, so plug and play is supported without manual pairing. It is very useful for the person who is not familiar with network knowledge, especially for CCTV surveillance transmission application.

Easy to setup and manage

CPE12(MS-Loco5AC) comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Controller.

Professional outdoor design

Equipped with IP65 waterproof enclouse and high quality hardware design, MS-Loco5AC can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment.

Önce deneyin, sonra satın alın

Lütfen gereksinimlerinizi e-posta adresimize gönderin, en kısa sürede sizinle iletişime geçeceğiz.

info@ip-com.com.cn