CPE12

CPE12

5GHz 5km Point to Point Outdoor CPE
  • 5GHz 11n 300Mbps
  • 14dbi directional antenna
  • IP65 waterproof enclosure
  • 6000V Lightning Protection
  • AP,Station,WISP operating mode supported
  • Up to 60 meters of flexible deployment with included PoE Injector
CPE12 5GHz Long Range Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 14dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup.

5km+ transmission Range

CPE12 adopts of independent power amplifier and 14dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km.

Auto-bridge For Two Device

CPE12 adopts of auto-bridge technology,two cpe can connect to each other when you power on them face to face. It is very easy to setup for CCTV surveillance and data

Super channel-Extended Frequency

CPE12 adopt of Qualcomm AR9344 chipset and special software mechanism optimization for radio driven architecture to offer extended frequency support. This feature is designed to help users get out of the congested, unlicensed 5GHz band and into clean spectrum.

IMAX-IP-COM TDMA proprietary protocol

IMAX is IP-COM TDMA (Time Division Multiple Access) proprietary protocol to improve performance and capacity for wireless WISP outdoor application scenarios.

In outdoor enviroment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can't sense each other, they become"hidden nodes" and cannot coordinate access to the wireless channel.

Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput.

With IMAX, it coordinate all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocol.

Multiple Application Scenarios

Long-Distance Wireless Connection

One work as AP mode and another work as Station mode to create a long distance wrieless connecton for video surveillance and data transmission.

WISP(Client+Router) Mode

Wirelessly connect to WISP station/hotspot to share Internet to local wireless and wired network.

Professional Outdoor Design

Equipped with IP65 waterproof enclouse and high quality hardware design, CPE12 can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment

Easy to Setup and Manage

CPE12 comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Controller.

  • 5GHz 11n 300Mbps
  • 14dbi directional antenna
  • IP65 waterproof enclosure
  • 6000V Lightning Protection
  • AP,Station,WISP operating mode supported
  • Up to 60 meters of flexible deployment with included PoE Injector
Product Information
Model CPE12
Dimensions 270*94.86*67.5mm
Deployment Pole Mount/Wall Mount
Application Scenarios WISP CPE, Data transmission and Long range video surveillance
Hardware Features
Frequency Range 5GHz
Compliant Standards IEEE 802.11a/n
Private TDMA Protocol IMAX
Maximum Wireless Rate 300Mbps
Interfaces 1*10/100Mbps Ethernet Port
Antennas Gain 14dbi
Antenna Beamwidth Horizonal: 30°
Vertical: 30°
Elevation: 30°
Reset Button 1
GND 1
Power Consumption 8.5W
Waterproof Level IP65
LED indicator PoE/LAN,LED1,LED2,LED3
Power Method 24V0.5A Passive PoE
Lightning Protection 6000V
Passive PoE Passive power over ethenet via PoE/LAN (+4,5pins; -7,8pins)
Voltage range: 21-25V DC
Receiver sensitivity MCS0: -96dbm
MCS7: -72dbm
Software Features
Operating mode AP/Station/WISP/P2MP/WDS Repeater/Router
Enable/Disable Wireless Radio Support
SSID Hidden Support
Wireless Client isolation Support
SSID Isolation Support
Channel Bandwidth 10/20/30/40MHz
Client Limitation For SSID Support
Wireless Access Control Support
Weak Signal Client Limitation Support
Transmission Power Adjustable power by 1dBm
WMM Capable Support
APSD Capable Support
Wireless Security 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
Transparent Bridge Support
VLAN Tagging for SSID Support
DHCP Server Support
VPN Pass-Through PPTP,L2TP
Remote Web access Support
Schedule Reboot Support
Page Timeout Support
Ping Watchdog Support
Dyndns noip, dyndns.org
Network Diagnoses Ping, Traceroute, Signal Scan
Time&Date Setting Support
Firmware upgrade Support
Backup/Restore Configuration Support
Username Managerment Support
System Log Support
Managed By Controller PC Software -- CPE Controller
Others
Package Contents 1*5km Point to Point Outdoor CPE CPE12
1*PoE Power Adapter
1*Quick Installation Guide
Operating Temperature -30℃ ~ 60℃
Storage Temperature -40℃ ~ 70℃
Operating Humidity 10%~90% non-condensing
Storage Humidity 10%~90% non-condensing
Default login IP 192.168.2.1
Default Login Username admin
Default Login Password admin
Certifications FCC/CE/RoHS

CPE12 5GHz Long Range Outdoor CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features with 14dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network. Adopt of auto-bridging technology,two CPE can connect to each other automatically to make it easy to setup.