- Easy to configure, manage and monitor APs
- Maximum AP managed number up to 512
- Remote manage multi branch AP and AP controller
- Built-in captive portal server and customerized welcome page
- Access device type and customer behavior statistic
AC2000 come with abundant wireless feature management including editing AP's name,SSID,Security key,RSSI threshold,Client limitation, VLAN,output power, Client isolation, SSID isolation, 5G band steering. Moreover you can monitor AP and clients online status after all setup finished.
AC2000 can manage AP and AP controller remotely over internet helps administrator manage and monitor multi branch or location Wi-Fi network more easily.
AC2000 integrate with an builting Wi-Fi marketing system to provide administrator with value-added features including:
Captive authentication supported
Built-in 3000 user authentication server
Customer welcome page and redirect website
Connected device type and customer behavior statistic
AC2000 adopt of 19 inch rackmount design to mount on the rack perfectly. And you just plug it into the exsiting network through branch deployment to manage all Aps without changing any network topology.
|Protocols & Standards||IEEE 802.11a/b/g/n/ac|
|Ethernet Ports||Five 10/100/1000 electrical ports|
|Total Power Consumption||24W (full load)|
|Default Managed APs||256|
|Maximum Managed Aps||512|
|Available managed ACs||64|
|Available managed APs||128|
|802.11 Protocol Family||Support|
|Users Access Limit||Support|
|Users Online Checking||Support|
|Auto-aging without Flow||Support|
|Multiple Country Code Deployment||Support|
|Wireless Users Isolation based on SSID||Support|
|Wireless Users L2 Isolation||Support|
|Automatic Channel Adjustment||Support|
|Power Static Adjustment||Support|
|Static Channel Settings||Support|
|Dynamic Speed Adjustment||Support|
|Weak Signal Clients Access Limit||Support|
|AP Reboot Control||Support|
|AC Discover (Layer 2)||Support|
|Set up Wireless AP RF Parameter Via AC||Support|
|Set up basic Network parameter Via AC||Support|
|Wireless Clients Isolation||Support|
|QVLAN & SSID Binding||Support|
|Passenger Flow Statistics and Analysis||Support|
|Management Type||WEB Unified Management|
|Debug Mode||Telnet Management|
|Default Login IP||192.168.10.1|
|Default User Name||admin|
|Operating Temperature||-20℃ to 70℃|
|Operating Humidity||10%－90%RH (non-condensing)|
|Storage Temperature||-30℃ to 70℃|
|Storage Humidity||0%－90%RH (non-condensing)|
1.This firmware is only fit for AC2000 and its firmware version must be in V1.0.2.XX or more.
2.Do not power off the device when upgrading.
3.Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.
1. Enable Air Interface Scheduling defaultly.
2. Client Timeout Interval change to 10 munites.
3. Solved issue that AP cannot upgrade in some special condition.
4. Solved issue with wrong quantities in statistics.